How to Program a Subaru Garage Door Opener
Programming a Subaru garage door opener is a straightforward process that ensures smooth and efficient operation of your garage door. Whether you are a new Subaru owner or simply looking to replace an old garage door opener, following these steps will help you get your garage door opener up and running in no time. In this article, we will guide you through the process of programming a Subaru garage door opener, from preparation to completion.
Before you begin, make sure you have the following items ready:
- Subaru garage door opener
- Programming remote control
- Wireless keypad (if applicable)
- Battery for the remote control (if needed)
Step 1: Locate the Programming Button
First, locate the programming button on your Subaru garage door opener. This button is usually found on the back or side of the opener unit. If you cannot find it, consult your owner’s manual for the exact location.
Step 2: Press the Programming Button
Press and hold the programming button on the Subaru garage door opener for about 5 seconds. You should see a light or indicator on the opener unit indicating that it is ready to be programmed.
Step 3: Program the Remote Control
With the programming button still pressed, point the programming remote control at the opener unit. Press and hold the button on the remote control for about 5 seconds. The opener unit’s indicator light should flash, indicating that the remote control has been successfully programmed.
Step 4: Program the Wireless Keypad (if applicable)
If your Subaru garage door opener is equipped with a wireless keypad, you will need to program it as well. Locate the programming button on the keypad and press and hold it for about 5 seconds. Once the indicator light on the keypad starts flashing, press the button on the keypad that corresponds to the desired code. Release the button, and the keypad should confirm that the code has been programmed.
Step 5: Test the Opener
After programming the remote control and keypad (if applicable), test the garage door opener to ensure it is functioning correctly. Press the button on the remote control, and the garage door should open and close as expected. If the opener does not respond, double-check that the remote control is properly programmed and that the batteries are fresh.
Conclusion
Programming a Subaru garage door opener is a simple task that can be completed in just a few steps. By following this guide, you can ensure that your garage door operates smoothly and efficiently. If you encounter any issues during the programming process, consult your owner’s manual or contact Subaru customer support for further assistance.
