How to Program Key Fob Jeep Cherokee
Programming a key fob for a Jeep Cherokee can be a straightforward process, but it’s important to follow the correct steps to ensure that your key fob functions properly. Whether you’re a new Jeep owner or simply need to replace a lost fob, this guide will walk you through the process step by step.
Before You Begin
Before you start programming your key fob, make sure you have the following:
– A new key fob
– The Jeep Cherokee’s vehicle identification number (VIN)
– A flathead screwdriver
– A pair of scissors
Step 1: Remove the Battery from the Existing Key Fob
1. Locate the battery cover on the existing key fob.
2. Use the flathead screwdriver to remove the screws holding the cover in place.
3. Carefully remove the cover and take out the battery.
Step 2: Program the New Key Fob
1. Insert the new battery into the key fob, making sure it is oriented correctly.
2. Close the battery cover and secure it with the screws.
3. Turn on the Jeep Cherokee’s ignition for about 5 seconds.
4. Turn off the ignition and wait for about 10 seconds.
Step 3: Complete the Programming Process
1. Press and hold the ” Unlock ” button on the new key fob for about 15 seconds.
2. While holding the ” Unlock ” button, press the ” Lock ” button on the key fob.
3. Release both buttons simultaneously when the door locks and unlocks automatically.
4. Repeat steps 1-3 for each additional key fob you want to program.
Step 4: Test the Key Fob
1. With the Jeep Cherokee’s ignition turned off, press the ” Unlock ” button on the key fob.
2. The doors should unlock and the lights should flash to confirm that the key fob is programmed correctly.
Conclusion
Programming a key fob for a Jeep Cherokee is a relatively simple task that can be completed in just a few minutes. By following these steps, you can ensure that your new key fob will work properly and provide you with convenient access to your vehicle. If you encounter any issues during the programming process, consult your Jeep Cherokee’s owner’s manual or contact a qualified mechanic for assistance.
