How to Program a Genie Keypad Garage Door Opener
Garage door openers have become an essential part of modern homes, providing convenience and security. Among the various brands available in the market, Genie is a well-known and trusted name. If you have recently purchased a Genie keypad garage door opener and are wondering how to program it, you have come to the right place. In this article, we will guide you through the step-by-step process of programming your Genie keypad garage door opener.
Step 1: Gather the Required Materials
Before you begin programming your Genie keypad garage door opener, make sure you have the following items ready:
– Genie keypad garage door opener
– Remote control
– Keychain with the Genie Smart Keypad
Step 2: Attach the Genie Smart Keypad
First, you need to attach the Genie Smart Keypad to your garage door opener. Locate the mounting bracket on the keypad and attach it to the garage door opener. Secure the keypad using the provided screws.
Step 3: Connect the Keypad to the Power Supply
Once the keypad is mounted, connect it to the power supply. The Genie Smart Keypad requires a 12V power source, which can be obtained from the garage door opener’s transformer.
Step 4: Programming the Keypad
Now it’s time to program the Genie keypad garage door opener. Follow these steps:
1. Turn off the garage door opener’s power supply.
2. Press and hold the “Learn” button on the Genie Smart Keypad for about 5 seconds until the LED indicator light turns on.
3. Press the “Learn” button on the remote control within 30 seconds of pressing the button on the keypad. The LED indicator light on the keypad will flash to indicate that the remote control has been paired successfully.
4. Release the “Learn” button on the keypad.
5. Press the “Learn” button on the remote control again to store the code. The LED indicator light will turn off to indicate that the programming is complete.
Step 5: Test the Keypad
After programming the Genie keypad garage door opener, it’s essential to test the keypad to ensure it is working correctly. Follow these steps:
1. Press the “Open” button on the Genie Smart Keypad.
2. The garage door should open, indicating that the keypad is working correctly.
3. Press the “Close” button on the Genie Smart Keypad to close the garage door.
Congratulations! You have successfully programmed your Genie keypad garage door opener. If you encounter any issues during the programming process, consult the Genie keypad garage door opener manual or contact Genie customer support for assistance. Enjoy the convenience and security that your new Genie keypad garage door opener brings to your home.
