How to Program Schlage Keypad Deadbolt: A Step-by-Step Guide
In today’s fast-paced world, security is a top priority for homeowners. Schlage keypad deadbolts offer a convenient and secure solution to protect your home. Programming a Schlage keypad deadbolt is a straightforward process that can be completed in just a few simple steps. Whether you’re installing a new deadbolt or reprogramming an existing one, this guide will walk you through the process from start to finish.
Step 1: Gather the Necessary Materials
Before you begin programming your Schlage keypad deadbolt, make sure you have all the necessary materials on hand. You will need:
– Schlage keypad deadbolt
– 4 AA batteries (for the keypad)
– Key (if your deadbolt has a key cylinder)
– Paper and pen (for recording the programming codes)
Step 2: Install the Batteries
First, insert the 4 AA batteries into the keypad. Make sure to follow the correct polarity to avoid damaging the keypad. Once the batteries are in place, the keypad should light up.
Step 3: Turn the Deadbolt to the Unlock Position
Locate the Schlage keypad deadbolt and turn it to the unlock position. This is typically indicated by a small arrow or lock symbol on the deadbolt. Ensure that the deadbolt is fully unlocked before proceeding.
Step 4: Program the Keypad
1. Press the “Program” button on the keypad. The keypad will display “Pgm.”
2. Enter the default programming code, which is usually “9999.” Press the “Enter” button to confirm.
3. The keypad will display “Code 1.” Enter the new code you want to use for your deadbolt. Press the “Enter” button to save the code.
4. Repeat step 3 for additional codes, if needed. You can program up to 19 different codes for your Schlage keypad deadbolt.
Step 5: Test the Deadbolt
After programming the keypad, test the deadbolt to ensure that it functions correctly. Enter one of the programmed codes and turn the deadbolt to the lock position. The deadbolt should engage, securing your door. To unlock the door, enter the correct code and turn the deadbolt to the unlock position.
Step 6: Record the Programming Codes
To prevent any future confusion, record the programming codes on a piece of paper and keep them in a safe place. This will come in handy if you need to add new users or reset the keypad in the future.
In conclusion, programming a Schlage keypad deadbolt is a simple process that can be completed in just a few steps. By following this guide, you can ensure that your home is secure and that you have peace of mind knowing that your Schlage keypad deadbolt is properly programmed.
