How to Program a RC73 DirecTV Remote
Are you struggling to program your RC73 DirecTV remote? Don’t worry; you’re not alone. Many DirecTV users face this challenge at some point. In this article, we will guide you through the process of programming your RC73 DirecTV remote, ensuring that you can enjoy your favorite shows and channels without any hassle.
Step 1: Locate the Remote Control Codes
The first step in programming your RC73 DirecTV remote is to locate the remote control codes. These codes can be found in the DirecTV user manual or on the DirecTV website. You will need the codes for the specific brand of your television and the type of device you want to control (e.g., cable box, satellite receiver, or VCR).
Step 2: Turn on Your Device
Before you start programming the remote, make sure that the device you want to control is turned on. This will allow the remote to communicate with the device and program the necessary codes.
Step 3: Press and Hold the Device Button
Press and hold the device button (e.g., TV, Cable, or Satellite) on the RC73 remote until the LED light on the remote blinks twice. This indicates that the remote is ready to program the device.
Step 4: Enter the Device Code
Using the number buttons on the RC73 remote, enter the device code for your television or other device. After entering the code, press the “Enter” button. The LED light on the remote should blink twice again, indicating that the code has been successfully entered.
Step 5: Test the Remote
Now, press the device button (e.g., TV, Cable, or Satellite) again. The remote should control your device, allowing you to change channels, adjust volume, or perform other functions. If the remote does not work, repeat the process with a different device code until you find one that works.
Step 6: Save the Code
Once you have found a working device code, press the “Mute” button on the RC73 remote. This will save the code, and the remote will now be programmed to control your device.
Conclusion
Programming your RC73 DirecTV remote may seem daunting at first, but with these simple steps, you can easily set up your remote to control your television, cable box, or other devices. Remember to consult your DirecTV user manual or website for specific codes and instructions. Happy watching!
